Suzuki 2005 GSF1200 Service Manual page 251

• Install the oil seal stopper ring (4).
CAUTION
!
Make sure that the oil seal stopper ring is
fitted securely.
• Install the dust seal (5).
5
4
Damper rod bolt
• Insert the inner rod/damper rod (cartridge) (6) and the
oil lock piece (7) into the inner tube.
• Apply THREAD LOCK "1342" to the damper rod bolt
and tighten it to the specified torque with a 6-mm
hexagon wrench and special tools.
CAUTION
!
Use a new damper rod bolt gasket to prevent
oil leakage.
: Thread lock cement 99000–32050 (Thread
Lock Cement 1342 or equivalent)
Tightening torque
Front fork damper rod bolt: 20 N·m (2.0 kgf-m,
14.5 lb-ft)
I649G1220023-02
7
6
I649G1220024-01
I649G1220025-01
Fork oil
• Place the front fork vertically without spring.
• Compress it fully.
• Pour specified front fork oil up to the top level of the
inner tube.
: Oil 99000–99001–SS8 (SUZUKI FORK OIL
SS-08 or equivalent)
Capacity (each leg)
516 ml (17.4/18.2 US/lmp oz)
• Move the inner rod slowly with the special tool more
than ten times until bubbles do not come out from the
oil.
NOTE
Refill front fork oil up to the top of the inner
tube to find bubbles while bleeding air.
Special tool
(A): 09940–52841 (Inner rod holder)
(A)
Front Suspension: 2B-6
I649G1220026-01
I649G1220027-04