5B-20 Manual Transmission:
• Fit the springs (1), pins (2) and pawls (3) to the
gearshift cam driven gear (4).
3
2
1
4
1
2
3
NOTE
Wider side "A" of pawl should be positioned
outside.
"A"
• Install the cam guide (5) and pawl lifter (6).
• Apply a small quantity of THREAD LOCK "1342" to
the screws.
: Thread lock cement 99000–32050 (Thread
Lock Cement 1342 or equivalent)
6
I649G1520069-01
3
I649G1520070-01
5
I649G1520071-01
• Install the gearshift shaft (7).
NOTE
Align the center teeth on the gearshift shaft
with the center teeth on the gearshift cam
driven gear.
7
• Install the washer and fix the gearshift shaft with the
snap ring.
CAUTION
!
Never reuse a snap ring.
Special tool
: 09900–06107 (Snap ring pliers)
I649G1520072-01
I649G1520073-01