1F-9 Engine Cooling System:
• Apply THREAD LOCK SUPER "1322" to the oil cooler
hose bracket bolts.
: Thread lock cement 99000–32110 (Thread
Lock Cement Super 1322 or equivalent)
• Tighten the oil cooler hose bracket bolts to specified
torque.
Tightening torque
Oil cooler hose bracket bolt (c): 10 N·m (1.0 kgf-
m, 7.0 lb-ft)
(c)
• Tighten the oil cooler hose union bolts to the specified
torque.
Tightening torque
Oil cooler hose union bolt (d): 28 N·m (2.8 kgf-m,
20.0 lb-ft)
• Pour engine oil and check the oil level. Refer to
"Engine Oil and Filter Replacement: in Section 0B".
(c)
I649G1160025-01
(d)
I649G1160026-01
Engine Cooling Hose Removal and Installation
Removal
1) Remove the fuel tank. Refer to "Fuel Tank Removal
and Installation: in Section 1G".
2) Remove the cooling hoses (1).
Installation
CAUTION
!
Replace the O-rings ((1) and (2)) with new
ones to prevent oil leakage.
1) Install the left and right cooling hoses and tighten
their mounting bolts to the specified torque.
Tightening torque
Engine Cooling hose mounting bolt (a): 10 N·m (
1.0 kgf-m, 7.0 lb-ft)
1
(a)
2) Install the fuel tank. Refer to "Fuel Tank Removal
and Installation: in Section 1G".
B649G11606029
1
I649G1160004-02
1
I649G1160005-02
(a)
1
2
I649G1160006-04