Engine Assembly Installation
Reinstall the engine in the reverse order of engine removal. Pay attention to the following points:
• Insert the two long bolts (1), (2) from left side. Install the brackets, spacer, bolts and nuts properly, as shown in the
following illustration.
NOTE
The engine mounting nuts are self-locking. Once the nuts have been removed, they are no longer of
any use.
Be sure to use new nuts and tighten them to the specified torque.
(c)
3, " c"
(c)
1. Engine mounting bolt (Upper)
2. Engine mounting bolt (Lower)
3. Engine mounting bolt (Front)
1," a "
5," e "
(d)
2,"b"
4, " d"
"b": 140 mm (5.5 in)
"c": 20 mm (0.8 in)
"d": 75 mm (3.0 in)
(c)
3, " c "
(a)
7," i "
"g"
(f)
"h "
(f)
[A]
(b)
4,"d"
(c)
[A]: Only for E-28 model; The engine mounting bracket and its bolts
are not equipped at the frame down tubes.
: 85 N⋅m (8.5 kgf-m, 61.5 lb-ft)
: 88 N⋅m (8.8 kgf-m, 63.5 lb-ft)
Engine Mechanical:
5,"e"
(d)
5," e"
(d)
6," f "
(e)
1D-9
B649G11406003
I649G1140300-04