Suzuki 2005 GSF1200 Service Manual page 352

5B-14 Manual Transmission:
2) Remove the 5th (Top) drive gear snap ring (3) from
its groove and slide it towards the 3rd drive gear (4).
Special tool
: 09900–06107 (Snap ring pliers)
3) Slide the lock washer (5) towards the 5th (Top) drive
gear (6), then turn the lock washer (7) and slide it
towards the 5th (top) drive gear (6).
5
7
4) Slide the 2nd drive gear (8) towards the 5th (Top)
drive gear (6), then remove the circlip (9).
Special tool
(A): 09900–06107 (Snap ring pliers)
5) Remove the 3rd drive gear (4), 5th (Top) drive gear
(6) and 2nd drive gear (8).
6
4
3
4
I649G1520044-01
6
I649G1520045-01
8
9
(A)
I649G1520046-02
6) Remove the snap ring (11) and 4th drive gear (10).
Special tool
: 09900–06107 (Snap ring pliers)
Driveshaft Gear Disassembly
CAUTION
!
Identify the position of each removed part.
Organize the parts in their respective groups
(i.e., drive or driven) so that they can be
reinstalled in their original positions.
• Disassemble the driveshaft gear as shown in the
illustration.
7 6 5
1. Bearing
2. 2nd driven gear
3. 5th (Top) driven gear
4. 3rd driven gear
10
11
I649G1520047-01
4 3 2 1
I649G1520048-01
5. 4th driven gear
6. Low driven gear
7. Bearing