Suzuki 2005 GSF1200 Service Manual page 393

14) Remove the steering stem nut using the special tool.
NOTE
When loosening the stem nuts, hold the
steering stem lower bracket to prevent it from
falling.
Special tool
(C): 09940–14911 (Steering stem nut
wrench)
(C)
15) Remove the steering stem lower bracket.
16) Remove the dust seal (7) and steering stem upper
bearing (8).
7
GSF1200S
1) Support the motorcycle with a jack or a wooden
block.
2) Remove the front wheel assembly. Refer to "Front
Wheel Assembly Removal and Installation: in
Section 2D".
3) Remove the front forks. Refer to "Front Fork
Removal and Installation: in Section 2B".
4) Remove the brake hose clamp (1).
5) Remove the cable guides(2).
I649G1620016-02
6) Remove the ignition switch using the special tools.
8
Special tool
7) Dismount the handlebars by removing the handlebar
holder set nuts.
NOTE
Place a rag on the fuel tank to prevent the
fuel tank scratched.
I649G1620017-02
Steering / Handlebar:
1
2
(A): 09930–11920 (Torx bit (JT 40H))
(B): 09930–11940 (Bit holder)
(A)
(B)
6B-6
I649G1620018-01
I649G1620019-01
I649G1620020-02