Ipv6 Snooping Vlan Setup; Ipv6 Dhcp Trust Setup - ZyXEL Communications XS1920 Series User Manual

26.13 IPv6 Snooping VLAN Setup

Use this screen to enable a DHCPv6 snooping policy on a specific VLAN interface. To open this
screen, click Advanced Application > IP Source Guard > IPv6 Snooping VLAN Setup.
Figure 168 Advanced Application > IP Source Guard > IPv6 Snooping VLAN Setup
The following table describes the labels in this screen.
Table 119 Advanced Application > IP Source Guard > IPv6 Snooping VLAN Setup
LABEL
Interface
Policy
Add
Cancel
Clear
Index
Interface
Policy
Delete
Cancel

26.14 IPv6 DHCP Trust Setup

Use this screen to specify which ports are trusted for DHCPv6 snooping. To open this screen, click
Advanced Application > IP Source Guard > IPv6 DHCP Trust Setup.
Note: DHCPv6 solicit packets are sent from a DHCPv6 client to a DHCPv6 server. Reply
packets from a DHCPv6 server connected to an untrusted port are discarded.
Use port * to have all ports be Untrusted or Trusted.
Chapter 26 IP Source Guard
DESCRIPTION
Select the VLAN interface to apply the selected DHCPv6 snooping policy.
Select the IPv6 snooping policy to apply to this VLAN interface.
Click this to create the VLAN interface-to-IPv6 snooping policy association.
Click this to reset the values above based or, if not applicable, to clear the fields above.
Click this to clear the fields above.
This field displays a sequential number for each binding.
This field displays the VLAN interface.
This field displays the DHCPv6 snooping policy.
Select an entry's check box to select a specific entry. Otherwise, select the check box in
the table heading row to select all entries.
Select an entry checkbox and click Delete to remove the specified entry.
Click this to clear the check boxes above.
XS1920 Series User's Guide
247