Kyocera TASKalfa 356ci Operation Manual page 373

Setup and Registration (System Menu) > System Menu
Item
IPP over SSL
HTTP
HTTPS
LDAP
SNMPv1/v2c
SNMPv3
Enhanced WSD
Enhanced WSD over SSL
eSCL
eSCL over SSL
*1 The setting will be changed after restarting the device or network.
*2 Set "SSL" to [On] in Security Settings.
Security Settings (page 8-45)
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.
Security Settings
Item
SSL
LAN Interface
Item
LAN Interface
To use the IPP protocol, set [IPP] and [SSL] to [On]. The default port number is 443.
Value: Off, On
NOTE
When selecting [On], it also requires a certificate for SSL. the default certificate is the self-
certificate of the machine.
Command Center RX User Guide
Select whether to communicate using HTTP.
Value: Off, On
Select whether to communicate using HTTPS.
Value: Off, On
Select whether to use LDAP.
Value: Off, On
Select whether to communicate using SNMP.
Value: Off, On
Select whether to communicate using SNMPv3.
Value: Off, On
Set whether to use our proprietary web services.
Value: Off, On
NOTE
Selecting [Off] will disable the functionality of WIA, TWAIN, and Network FAX driver.
Set whether to use our proprietary web services over SSL.
Value: Off, On
NOTE
Selecting [Off] will disable the functionality of WIA, TWAIN and Network FAX drivers.
Selects whether to receive scanned documents using eSCL.
Selects whether to receive scanned documents using eSCL over SSL.
Select whether to use SSL for communication.
Value: Off, On
Specify the settings for the LAN interface to be used.
Value: Auto, 10BASE-T Half, 10BASE-T Full, 100BASE-T Half, 100BASE-TX Full, 1000BASE-T
8-45
Description
*1
*1, *2
*1
*1
*1
*1, *2
*1
Description
Description
*1, *2
*1, *2