Kyocera TASKalfa 356ci Operation Manual page 297

Using Various Functions > Functions
Sending/Storing
NOTE
This cannot be set when Long Original is set.
Long Original (page 6-67)
Item
Off
On Stamp
Position
Font
Original Orientation
*1 This function can only be used when the optional OCR Scan Activation Kit is installed.
Date, User Name, Serial Number,
Numbering, Text 1, Text 2
Top Left, Top Middle, Top Right,
Middle Left, Center, Middle Right,
Bottom Left, Bottom Middle,
Bottom Right, Detail
Registered font sizes are
Size
displayed. For details on
registering font sizes, refer to the
following:
Font (Bates Stamp) (page 8-20)
None, Bold, Italic, Bold/Italic
Style
Courier, Letter Gothic
Font
Black, Red, Green, Blue, Cyan,
Color
Magenta, Yellow, White
10 to 100%
Density
(in 10% increments)
Transparent, Clipping, Overwrite
Display
Pattern
Top Edge on Top,
Top Edge on Left, Auto
Value
Set the stamp to be printed.
When [Text 1] or [Text 2] is selected, press
[Change] below and enter the text string.
If you selected [Date], press [Date Format] and
select [MM/DD/YYYY], [DD/MM/YYYY], or
[YYYY/MM/DD] to set the date format.
To set [Numbering], select [Numbering Default] and
set the starting sequence number (1 to 9999999).
Set the stamp position to be printed.
Select [Position] and select the text stamp position.
Select [Detail] to specify the stamp position using
numeric values.
Set the font size of bates stamp.
Set the font style of bates stamp.
Set the font of bates stamp.
Set the color of bates stamp.
Set the density of bates stamp color.
Set the value by selecting [+] or [-].
Set the display method of bates stamp.
Select the orientation of the original document top
*1
edge to scan correct direction. Select [Original
Orientation] to choose orientation of the originals,
either [Top Edge on Top] or [Top Edge on Left].
Then select [OK].
6-51
Description