Kyocera TASKalfa 356ci Operation Manual page 295

Using Various Functions > Functions
Sending/Storing
NOTE
This cannot be set when Long Original is set.
Long Original (page 6-67)
Item
Off
On Stamp
Position
Font
Original Orientation
*1 This function can only be used when the optional OCR Scan Activation Kit is installed.
Keyboard, Template 1 to 8
Top Left, Top Middle, Top Right,
Middle Left, Center, Middle Right,
Bottom Left, Bottom Middle,
Bottom Right, Detail
Registered font sizes are
Size
displayed. For details on
registering font sizes, refer to the
following:
Font (Text Stamp) (page 8-20)
Off, Circle, Rectangle, Underline
Character
Border
None, Bold, Italic, Bold/Italic
Style
Courier, Letter Gothic
Font
Black, Red, Green, Blue, Cyan,
Color
Magenta, Yellow, White
10 to 100%
Density
(in 10% increments)
Transparent, Clipping, Overwrite
Display
Pattern
Top Edge on Top,
Top Edge on Left, Auto
Value
Select [Keyboard] and enter the text string to be
printed, or select a text stamp from the displayed
templates.
Templates that have been set will appear.
For details on registering templates, refer to the
following:
Set the stamp position to be printed.
Select [Position] and select the text stamp position.
Select [Detail] to set the stamp position using
numeric values, and to set the stamp angle.
Set the font size of text stamp.
Set the character border and underline.
Set the font style of text stamp.
Set the font of text stamp.
Set the color of text stamp.
Set the density of text stamp color.
Set the value by selecting [+] or [-].
Set the display method of text stamp.
Select the orientation of the original document top
*1
edge to scan correct direction. Select [Original
Orientation] to choose orientation of the originals,
either [Top Edge on Top] or [Top Edge on Left].
Then select [OK].
6-49
Description
NOTE
Text (Text Stamp) (page 8-20)