Manual Staple - Kyocera TASKalfa 356ci Operation Manual

Operation on the Machine > Manual Staple

Manual Staple

You can staple copied paper manually without any print operation. It is useful when you have forgotten to set the staple
sort mode before starting copying, or when you want to staple originals.
NOTE
This function requires the optional Sheet Finisher:
3,000-Sheet Finisher (page 11-28)
If there are no staples when manual stapling is performed, the stapling position lamps and stapling position key LEDs all
blink. Add staples.
Replacing Staples (3,000-Sheet Finisher) (page 10-17)
Manual stapling cannot be executed when the machine is in operation.
Maximum number of sheets available for manual stapling
Paper size
Ledger, Legal, Folio, Oficio II, A3, B4, 8K
A4, B5, Letter, 16K
Use the keys on the control section of the Finisher (optional) for manual stapling.
Stapling position
lamps
1
2
30 sheets
50 sheets
Stapling position key
Press the stapling position key on the stapling control section.
The shutter of the paper exit area is opened and this equipment enters into the manual staple
mode.
Set the staple position.
Press the stapling position key to select the stapling position
(Back / Front / 2 Points
Operation is not possible while the stapling position lamps are blinking. Operate after the
lamps light solidly.
Paper weight
2
52 - 105 g/m
(14.0 - 28.0 lb. Bond)
Stapling key / lamp
).
5-69