Wireless Network - Kyocera TASKalfa 356ci Operation Manual

Setup and Registration (System Menu) > System Menu

Wireless Network

[System Menu] key > [System/Network] > [Wireless Network]
Configure settings for the optional Wireless Network Interface Kit.
Setup
NOTE
This function is displayed when the optional Wireless Network Interface Kit is installed.
Item
Connection Status
Quick Setup Wizard
Available Network
Push Button Method
PIN Code Method
(Device)
PIN Code Method
(Terminal)
Custom Setup
Network Name (SSID)
Connection Mode
Channel
Network Authentication
Encryption
*1 Not displayed if you selected [Ad Hoc] for "Connection Mode".
*2 Not displayed if you selected [WPA2-PSK] for "Network Authentication".
When the optional Wireless Network Interface Kit is installed, you can check the wireless LAN status.
If the machine will connect to an access point that supports the automatic wireless network setup,
connection settings can be configured by Quick Setup.
Select access points to which the machine can be connected, enter the Preshared Key and
start a connection.
If the access point supports the push button method, wireless settings can be configured using
the push button. This setting executes push button, and the connection is started by pressing
the push button on the access point.
NOTE
The push button method supports only the WPS.
Starts connection using the machine's PIN code. Enter the PIN code into the access point. The
PIN code of the machine is automatically generated.
Starts connection using the PIN code of the access point. Enter the PIN code of the access point.
The detailed settings for wireless LAN can be changed.
Set the SSID (Service Set Identifier) of the wireless LAN to which the machine connects.
NOTE
Up to 32 characters can be entered.
Set the connection mode.
Value: Ad Hoc, Infrastructure
NOTE
Ad Hoc: Directly communicates with the device without going through an access point. This
method cannot be used to connect to two or more devices.
Infrastructure: Performs communication through an access point.
Set channel. Use [-] / [+] or the numeric keys to enter a number.
Value: 1 to 11
Select network authentication type. To select other options, open the device home page from a
computer.
Value: Open, Shared, WPA-PSK
Select encryption method. If the option other than [Disable] is selected, enter the WEP key or
the Preshared key. The setting values vary depending on the Network Authentication setting.
Select [Data Encryption].
When Network Authentication is set to [Open] or [Shared]
Value: Disable, WEP
When Network Authentication is set to [WPA-PSK] or [WPA2-PSK]
*2 *2
Value: TKIP , AES, Auto
NOTE
If [WEP] is selected, enter the WEP key. Up to 26 characters can be entered.
If [TKIP], [AES] or [Auto] is selected, enter the Preshared key. Enter the value in 8 to 64 characters.
8-48
Description
*1 *1
, WPA2-PSK
, Preshared Key