Table of Contents
Advertisement
Setup and Registration (System Menu) > System Menu
Error Handling
[System Menu] key > [Common Settings] > [Error Handling]
Select whether to cancel or continue the job when error has occurred.
Item
Duplexing Error
Finishing Error
No Staple Error
Finished Pages Exceeded
Punch Waste Full Error
Paper Mismatch Error
Set what to do when duplex printing is not possible for the selected paper sizes and media
types.
Value
1-sided: Printed in 1-sided
Display Error: Message to cancel printing is displayed.
Set alternative actions when finishing (Staple/Punch/Offset) is not available for the selected
paper size or media type.
Value
Ignore: The setting is ignored and the job is printed.
Display Error: Message to cancel printing is displayed.
Set what to do when staples run out during printing.
Value
Ignore: Printing continues without stapling.
Display Error: Message to cancel printing is displayed.
NOTE
Requires the optional Sheet Finisher.
Set what to do when finishing (stapling or offsetting) capacity is exceeded during printing.
Value
Ignore: Printing continues without finishing.
Display Error: Message to cancel printing is displayed.
NOTE
Requires the optional Sheet Finisher.
Set what to do when the punch waste box becomes full during printing.
Value
Ignore: Printing continues without punching.
Display Error: Message to cancel printing is displayed.
NOTE
Requires the optional Sheet Finisher and Hole Punch Unit.
Set what to do when the selected paper size or type does not match paper size or type loaded
in the specified paper source while printing from the computer by specifying the cassette or
multi-purpose tray.
Value
Ignore: The setting is ignored and the job is printed.
Display Error: Message to cancel printing is displayed.
8-14
Description
Advertisement
Table of Contents
Troubleshooting
