Making Sure Your Workstation Recognizes The Floppy Disk Drive - DEC Personal DECstation 5000 User Manual

Internal Storage Devices
9.2 Installing a Floppy Disk Drive
Figure 9–5 Connecting the FDI Cable and the Internal Drive Power Cable
WSMXS101
.
12. Replace the cover of the system unit. (See ''Section 1.1.3.2'' on page 1-9.)
13. Turn on the workstation by pressing the 1 on the on/off switch on the back
of the system unit.
9.3 Making Sure Your Workstation Recognizes the Floppy
Disk Drive
1. If the workstation software is running, shut it down: Type shutdown -h
now and press Return.
2. When you see the console prompt (>>), type cnfg 3 and press Return.
The display lists the drives connected to slot 3 of your system; this is the slot
number for the base system module. The upper part of the display will look
something like this:
3: KN02-CA DEC x1.2g
9–6 Internal Storage Devices
TCF0 (16 MB)
(CX - d=8)
(_b: devs = 2)
(FDI:1)
(enet: 08-00-2b-xx-xx-xx)
(SCSI = 7)