9.5.1.1 RZ23L Hard Disk Drive
The SCSI jumpers are on the underside of the RZ23L drive. Position the
jumpers as shown in Figure 9–7 to set the SCSI ID. The ID should be 2 unless
you have another device with SCSI 2 already attached to the SCSI connector
at the back of the system unit.
Figure 9–7 SCSI ID Jumper Settings for the RZ23L Hard Disk Drive
SCSI ID 0
SCSI ID 1
SCSI ID 2
SCSI ID pins
WSMXS060
.
Internal Storage Devices
9.5 Installing a Hard Disk Drive
SCSI ID 3
SCSI ID 4
SCSI ID 5
SCSI ID 6
SCSI connector
Power supply connector
Internal Storage Devices 9–9