DEC Personal DECstation 5000 User Manual page 29

The Five Basic Parts
1.2 The Monitor
4. Find the monitor power cable. Plug the cable into the power connector
on the monitor and into the outlet to the left of the main power outlet on
the back of the system unit. This connects the monitor to the system unit
power supply. Leave the monitor power switch in the on position; when you
turn on the power to the system unit, the monitor will go on, too.
5. You can order an additional power cord and connect your monitor to a
power strip or wall outlet instead of to the system unit, if you want. In this
case, you'll need to use the monitor's power switch to turn it on.
Figure 1–13 Connecting the Monitor
WSMXS038
.
If you want to connect your monitor at a distance from your system unit,
you may need longer cords and cables than the ones that come with the
workstation. You can order the following cables from Digital:
• 10-foot color video cable (customer order #BC29G-09)
• 10-foot grayscale cable (customer order #BC09M-10)
1–14 The Five Basic Parts