Removing A Cpu Module; The Cpu And Its Mounting Posts - DEC Personal DECstation 5000 User Manual

11.1 Removing a CPU Module

1. If the workstation software is running, shut it down: type shutdown -h now
and press Return.
2. Turn off the system unit by pressing the 0 on the on/off switch on the back.
Unplug the system unit power cord.
3. Open the system unit. (See Section 1.1.3.1.)
4. Put on the antistatic wrist strap. (See Figure 1–5)
5. Locate the three mounting posts that fasten the CPU module to the base
system module.
Figure 11–2 The CPU and its mounting posts
CPU module
WSMXS032
.
CPU Modules
11.1 Removing a CPU Module
Mounting posts
CPU Modules 11–3