Command; Test Command; G.2.16 T Command - DEC Personal DECstation 5000 User Manual

Console Commands
G.2 Summary of Console Commands
• Include the optional -S parameter to suppress any error messages if the
script is not found.
• To run a specific script, include the optional slot number/script parameter.
slot number is the slot number of the module that has the script you
want to run.
script is the name of the script you want to run.
• The use of any additional arguments depends on the particular script you
specified in the sh command.
You can also run a script by typing slot number/script.
slot number is the slot number of the module that contains the script you
want to run.
script is the name of the script you want to run.
For example, to run the thorough power-up self-test script for a SCSI controller
and drives in slot 2, type sh 2/pst-t and press Return.

G.2.16 t Command

Use the t command to run individual tests.
The t command format is
t [-l] slot name/test name [arg...]
Keep the following points in mind about the t command:
• Include the optional -l parameter to have the test loop until you press
Ctrl-c or reset the system.
• Replace slot number with the slot number of the module you want to test.
• Replace test name with the name of the individual test you want to run.
To display the name and format of all individual tests for a module, type t slot
number/?, where you replace slot number with the slot number of the module
for which you want to display tests, and press Return.
G.2.17 test Command
Use the test command to run a thorough test of all system hardware.
The test command format is
test
G–14 Console Commands