The Five Basic Parts
1.1 The System Unit
3. Remove the two screws on the back edge of the system unit cover.
Figure 1–6 System Tool
WSMXS098
.
4. Find the system tool that came with your workstation. Insert the system
tool into one of the two small rectangular holes just beneath the edge of
the cover on the back of the system unit. Lift up on the tool until the cover
loosens. Insert the tool into the other hole and repeat the procedure.
Figure 1–7 Using the System Tool to Raise the Cover
WSMXS088
.
1–8 The Five Basic Parts