Testing Your Cpu Module; Attaching The Cpu Module - DEC Personal DECstation 5000 User Manual

CPU Modules
11.2 Installing a CPU Module
4. Align the three holes in the CPU module with the mounting posts on the
base module.
5. Push the CPU module straight down over the mounting posts. Press the
CPU module connector into the connector on the base module. Press each
of the three corner holes onto its corresponding mounting post.
Figure 11–5 Attaching the CPU module
CPU connector
Base module
connector
WSMXS035
.
6. Replace the cover of your system unit. (See Section 1.1.3.2.)

11.3 Testing Your CPU Module

Once you've installed a new CPU module, you need to make sure your system
recognizes it. Follow these steps:
1. Turn on your workstation.
2. At the console prompt (>>), type 3/misc/cpu-type and press Return.
11–6 CPU Modules
Holes
(one of three)
Mounting posts
(one of three)