Installing The Hard Disk Drive In The System Unit - DEC Personal DECstation 5000 User Manual

Internal Storage Devices
9.5 Installing a Hard Disk Drive
Figure 9–13 Installing the Hard Disk Drive in the System Unit
Locking post
WSMXS102
.
8. Lower the right side of the disk drive assembly so the hole in the mounting
bracket fits over the post on the base of the system unit. Press the drive
down firmly.
9. Slide the latch beside the post into locked position.
10. Connect the SCSI cable to the SCSI connector on the base system module.
11. Connect the internal drive power cable to the drive power connector on the
base system module. (Note: The internal drive power cable serves both
the floppy drive and the hard drive. If you've installed a floppy drive, the
power cable will already be connected to the base system module.)
9–16 Internal Storage Devices
Tabs
Cutouts