Toyota 1KZ-TE Repair Manual page 271

CLICK HERE TO VIEW CHAPTER INDEX
5
1
6
SST
Stopper
Bolt
COOLING
7
3
2
4
8
Tank
Lock
Plate
Z18950
B09015
B09016
H
B09017
- - RADIATOR
4 . CAULK LO CK P LATE
(a) Lightly press SST against the lock plate in the order
shown in the illustration. After repeating this a few times,
fully caulk the lock plate by squeezing the handle until
stopped by the stopper bolt.
SST 09230 -- 01010
HINT:
Do not stake the areas protruding around the ports.
S
The points shown in the rib sides near here cannot be
S
staked with SST. Use pliers similar object and be careful
not to damage the core plates.
(b) Check the lock plate height (H) after completing the caluk-
ing.
Plate height (H):
7.40 - - 7.80 mm (0.2913 - - 0.3071 in.)
If not within the specified height, adjust the stopper bolt of the
handle again and caulk again.
5 . I NS TALL RADI ATO R CAP
6 . I NS TALL DRAI N P LUG
(a) Install a new O--ring to the drain plug.
(b) Install the drain plug.
1KZ-TE Pages From Manual
TO MODEL INDEX
CO- -19
CONTINUED