Toyota 1KZ-TE Repair Manual page 102

CLICK HERE TO VIEW CHAPTER INDEX
ENGINE MECHANICAL - - TIMING BELT
RE M O VAL
HINT:
If replacing the timing belt before the timing belt warning light
comes on, (light comes on after 100,000 km of driving), be sure
to reset the timing belt counter of the speedometer to zero.
1 . RE MO V E TI MI NG BE LT CO V E R
Remove the 4 bolts, seal washers, 2 clips, timing belt cover and
gasket.
A10776
2 . S E T NO . 4 CY LI NDE R TO T DC / CO MP RE S S I O N
Turn the crankshaft pulley clockwise, set both No.1 and No.2
camshaft pulley grooves at TDC marks.
P12465
3 . I F RE - - US I NG T I MI NG BE LT, MARK TI MI NG BE LT
HINT:
If reusing the timing belt, draw a direction arrow on the bolt (in
the direction of engine revolution), and place matchmarks on
the pulleys and belt as shown in the illustration.
A10778
4 . RE MO V E TI MI NG BE LT TE NS I O NE R
Alternately loosen the 2 bolts, remove them and timing belt ten-
sioner.
A10780
1KZ-TE Pages From Manual Pages From Manual
TO MODEL INDEX
EM- -13
EM15A- -01
CONTINUED