Toyota 1KZ-TE Repair Manual page 109

CLICK HERE TO VIEW CHAPTER INDEX
EM- -20
1.5 mm
Hexagon
Wrench
ENGINE MECHANICAL - - TIMING BELT
8 . S E T TI MI NG BE LT TE NS I O NE R
(a) Using a press, slowly press in the push rod using 981 --
9,807 N (100 -- 1,000 kgf, 220 --2,205 lbf) of force.
(b) Align the hoses of the push rod and housing, pass a 1.5
mm hexagon wrench through the hoses to keep the set-
ting position of the push rod.
(c) Release the press.
P12458
9. INSTALL TIMING BELT TENSIONER
(a) Temporarily install the timing belt tensioner with the 2
bolts while pushing the idler pulley toward the timing belt.
(b) Tighten the 2 bolts.
Torque: 13 N∙m (130 kgf∙cm, 9 ft∙lbf)
A10780
(c) Remove the 1.5 mm hexagon wrench from the tensioner.
P12460
1 0 . CHE CK VALV E T I MI NG
Turn the crankshaft pulley clockwise and check that each pulley
aligns with the timing marks (TDC mark) as shown in the illustra-
tion.
If the marks do not align, remove the timing belt and reinstall it.
P12462
1KZ-TE Pages From Manual
TO MODEL INDEX
CONTINUED