Toyota 1KZ-TE Repair Manual page 126

CLICK HERE TO VIEW CHAPTER INDEX
EM- -36
SST
New O--Ring
ENGINE MECHANICAL
P12096
P12095
P12107
SST
P12378
Engine Oil
P12094
- - TIMING GEAR
(a) Install the crankshaft timing gear.
(1) With the crankshaft key groove facing upward,
install the crankshaft timing gear into the crank-
shaft.
(2) When doing this, the matchmarks of the oil pump
drive shaft gear and crankshaft timing gear should
be matched at "1".
(3) Using SST and a hammer, tap in the timing gear.
SST 09223 -- 00010
(b) Install the injection pump drive gear.
(1) Install the set key to the groove of the injection
pump drive shaft.
(2) The matchmarks on the No.2 balance shaft driven
gear should be aligned with "3" marks.
(3) Install a new O--ring to the injection pump drive
gear.
(4) Install the injection pump drive gear set nut.
(5) Using SST, torque the nut.
SST 09960 -- 10010 (09962 -- 01000, 09963 -- 00600)
Torque: 64 N∙m (650 kgf∙cm, 47 ft∙lbf)
(c) Install the idler gear.
(1) Coat the idler gear shaft with engine oil as shown in
the illustration.
1KZ-TE Pages From Manual
TO MODEL INDEX
CONTINUED