Toyota 1KZ-TE Repair Manual page 185

CLICK HERE TO VIEW CHAPTER INDEX
EM- -90
ENGINE MECHANICAL - - CYLINDER BLOCK
Crank pin diameter:
STD
U/S 0.25
U/S 0.50
If the diameter is not as specified, check the oil clearance
page EM -- 75). If necessary, grind or replace the crankshaft.
(b) Check each main journal and crank pin for taper and out--
of--round as shown.
Maximum taper and out- -of- -round:
0.020 mm (0.0008 in.)
If the taper and out--of--round is greater than maximum, replace
the crankshaft.
1KZ-TE
58.982 - - 59.000 mm (2.3221 - - 2.3228 in.)
58.745 - - 58.755 mm (2.3128 - - 2.3132 in.)
58.495 - - 58.505 mm (2.3028 - - 2.3132 in.)
Pages From Manual
TO MODEL INDEX
(See