Toyota 1KZ-TE Repair Manual page 122

CLICK HERE TO VIEW CHAPTER INDEX
EM- -32
ENGINE MECHANICAL
2 .
(a)
Oil Seal
A11470
SST
P11662
(b)
NOTICE:
Be careful not to damage the injection pump drive gear.
Tape the screwdriver tip.
Oil
Seal
P11655
SST
P11659
3 .
(a)
SST
A11475
- - TIMING GEAR
RE P L ACE I NJ E CTI O N P UMP DRI V E G E AR O I L S E AL
If the timing gear cover is removed from cylinder block:
(1) Using a screwdriver and hammer, tap out the oil
seal.
(2) Using SST and a hammer, tap in a new oil seal until
its surface is flush with the timing gear cover edge.
SST 09223 -- 78010
(3) Apply MP grease to the oil seal lip.
If the timing gear cover is installed to the cylinder block:
(1) Using a screwdriver, pry out the oil seal.
(2) Apply MP grease to the oil seal lip.
(3) Using SST and a hammer, tap in a new oil seal until
its surface is flush with the timing gear cover edge.
SST 09223 -- 78010
RE P L ACE I NJ E CTI O N P UMP DRI V E G E AR BE ARI NG
Using SST, remove the bearing.
SST 09950 -- 40010 (09951 -- 04010, 09952 -- 04010,
09953 -- 04020, 09954 -- 04010, 09955 -- 04041)
1KZ-TE Pages From Manual
TO MODEL INDEX
CONTINUED