Toyota 1KZ-TE Repair Manual page 153

CLICK HERE TO VIEW CHAPTER INDEX
EM- -60
Camshaft
Oil
Seal
SST
SST
ENGINE MECHANICAL - - CYLINDER HEAD
2 . RE P L ACE CAMS HAFT O I L S E AL
HINT:
There are 2 methods (a and b) to replace the oil seal which are
as follows:
(a) If the camshaft oil seal retainer is removed from the cylin-
der head:
(1) Using a screwdriver, tap out the oil seal.
P12467
(2) Using SST and a hammer, tap in a new seal until its
surface is flush with the oil seal retainer edge.
SST
(3) Apply MP grease to the oil seal lip.
P12457
(b) If the camshaft oil seal retainer is installed to the cylinder
head:
(1) Using a screwdriver, pry out the oil seal.
NOTICE:
Be careful not to damage the camshaft. Tape the screw-
driver tip.
P11639
(2) Apply MP grease to a new oil seal lip.
(3) Using SST and a hammer, tap in the oil seal until its
surface is flush with the oil seal retainer edge.
SST
P11610
09223 -- 46011
09223 -- 46011
1KZ-TE Pages From Manual
TO MODEL INDEX