Honda TRX450R Service Manual page 399

REAR WHEEL/SUSPENSION
Be careful not to Install the swingarm between the frame and engine,
drop the dust seal and insert the pivot bolt from the left side.
caps. Apply grease to the pivot nut threads and seating
surface.
Install the pivot nut and tighten it.
TORQUE: 108 N-m (11.0 kgf-m, 80 Ibf-ft)
Hook the brake pedal return spring properly as
shown.
Install new O-rings into the grooves in the shock
link-to-swingarm bolt.
Apply grease to the pivot surface of the bolt.
Install the shock link into the swingarm with the bolt
and nut.
Install the shock absorber onto the shock arm with
the bolt and nut.
Tighten the shock absorber lower mounting nut and
shock link-to-swingarm nut.
TORQUE:
Shock absorber lower mounting nut:
59 N-m (6.0 kgf m, 43 Ibf ft)
Shock link-to-swingarm nut:
44 N-m (4.5 kgf m, 33 Ibf ft)
SHOCK LINK-TO-SWINGARM BOLT
SHOCK ABSORBER LOWER
MOUNTING BOLT
Install the parking brake cable clamp with a new
bolt and tighten the bolt.
TORQUE: 9.8 N-m (1.0 kgf-m, 7 Ibfft)
Install the rear brake hose clamp with a new bolt
and tighten the bolt.
TORQUE: 9.8 N-m (1.0 kgf-m, 7 Ibfft)
18-23