Honda TRX450R Service Manual page 341

CRANKCASE/TRANSMISSION/CRANKSHAFT/BALANCER (After '05)
Remove the crankshaft oil seal.
Remove the set plate bolts, washers and set plates
from the right crankcase.
Drive the crankshaft bearing out of the right crank-
case.
Remove the bolts and set plates.
Drive the countershaft bearing, mainshaft bearing
and shift drum bearing out of the right crankcase.
MAINSHAFT BEARING ^ BOLTS/SET PLATES
I SHIFT DRUM
BEARING
COUNTERSHAFT
BEARING
Remove the bolts and set plates.
Drive the balancer shaft bearing out of the right
crankcase.
BOLTS/SET PLATES
BALANCER SHAFT BEARING
16-23