FUEL SYSTEM (After '05)
The push rod link Pull out the push rod while pushing the push rod
lever adjusting link lever.
screw is factory
preset. Adjustment
and disassembly
are not necessary.
PUSH ROD
Check the diaphragm for deterioration or pin hole.
Check the spring for damage or fatigue.
Check the push rod for wear, bent and damage.
SPRING
DIAPHRAGM
PUSH ROD
Remove the E-clip, washer, return spring and push
rod link lever.
E-CLIP/WASHER
RETURN SPRING
Remove the float pin by gently tapping it with a suit-
able driver (O.D.: 2 mm).
Remove the float and float valve.
Check the float for damage or fuel in the float.
Replace the float if necessary.
t
c
LOAT
FLOAT PIN
( r
1
/ \lfl
I
/ 1 feRi
, FLOAT VALVE
1/ 4
LL
^ r
8-13