Honda TRX450R Service Manual page 288

CLUTCH/STARTER CLUTCH/KICK STARTER/GEARSHIFT LINKAGE (After '05)
Check the ratchet pawls, plungers and drum shifter
for wear or damage.
Check the plunger spring for fatigue or damage.
RATCHET PAWL
DRUM SHIFTER
SPRING PLUNGER
INSTALLATION
Install the dowel pin into the shift drum hole.
Install the return spring, washer, stopper arm and
bolt, and tighten the bolt.
TORQUE: 12 N m (1.2 kgf m, 9 Ibfft)
Hold the stopper arm using a screwdriver and install
the gearshift drum center by aligning the pin groove
with the dowel pin.
Apply locking agent to the center pin bolt threads.
Install the center pin bolt and tighten it.
TORQUE: 22 N m (2.2 kgf m, 16 Ibfft)
STOPPER ARM I B RETURN SPRING
14-26