Honda TRX450R Service Manual page 386

REAR WHEEL/SUSPENSION
- snap ring
- caliperstay
- stopper bushing
- O-rings from the bearing holder and stay groove
STAY
bearing holder pinch bolts
seal rubber
- bearing holder
- O-rings from the bearing holder grooves
- dust seals
SNAP RING
PINCH BOLTS
DUST SEAL
INSPECTION
Set the axle in v-blocks and measure the axle runout
with a dial indicator.
Actual runout is 1/2 the total indicator reading.
SERVICE LIMIT: 3.0 mm (0.12 in)
18-10