FUEL SYSTEM (After '05)
Install the jet needle into the throttle valve.
Tighten the needle holder to the specified torque.
TORQUE: 2.1 N m (0.2 kgf-m, 1.5 Ibfft)
Install a new O-ring and top cover.
Install the wire clamp and bolts.
Tighten the bolts to the specified torque.
TORQUE: 2.1 N m (0.2 kgfm, 1.5 Ibfft)
Clamp the throttle position sensor wire and carbure-
tor switch wire at white tape point.
Install the carburetor insulator and align the lug on
the carburetor with the groove in the insulator.
Tighten the insulator band screw securely.
INSULATOR
BAND SCREW
8-21