Honda TRX450R Service Manual page 195

ENGINE REMOVAL/INSTALLATION
Install the spark plug cap onto the plug and connect
the connector to the engine coolant temperature
(ECT) sensor.
'04 - '05: Connect the alternator connectors.
Install the following:
- brake pedal (page 19-28)
- heat guard plate (page 3-9)
- carburetor (page 7-21)
- exhaust system (page 3-12)
Fill the crankcase with the recommended engine oil
(page 4-15).
Fill the transmission with the recommended trans-
mission oil (page 4-18).
Fill and bleed the cooling system (page 9-7).
Adjust the following:
- drive chain slack (page 4-22)
- parking brake lever free play (page 4-28)
- clutch lever free play (page 4-29)
ECT SENSOR CONNECTOR
ALTERNATOR CONNECTORS
After '05: Secure the wire harness and alternator wire with the
wire band.
Connect the alternator connectors and install the
clips.
Install the following:
- brake pedal (page 19-28)
- heat guard plate (page 3-9)
- carburetor (page 8-22)
- exhaust system (page 3-12)
Fill the crankcase with the recommended engine oil
(page 4-15).
Fill the transmission with the recommended trans-
mission oil (page 4-18).
Fill and bleed the cooling system (page 9-7).
Adjust the following:
- drive chain slack (page 4-22)
- parking brake lever free play (page 4-28)
- clutch lever free play (page 4-29)
WIRE BAND
ALTERNATOR CONNECTORS
10-13