CRANKCASE/TRANSMISSION/CRANKSHAFT/BALANCER (After '05)
CRANKCASE BEARING
CRANKCASE BEARING/OIL SEAL LOCATION
OIL SEAL (39 x 60 x 7.5)
RIGHT CRANKCASE:
RIGHT BALANCER SHAFT
BEARING (17x42x13)
I
I
M
\
RIGHT CRANKSHAFT
BEARING (30x76x19)
IQI ID
T
RIGHT COUNTERSHAFT
BEARING (17x42x12)
RIGHT MAINSHAFT
BEARING (25x56x15)
LEFT CRANKCASE:
LEFT BALANCER SHAFT
BEARING (20x32x14)
LEFT CRANKSHAFT
ROLLER BEARING
LEFT COUNTERSHAFT
BEARING (24x56x22.1)
OIL SEAL (20x33x7.5)
OIL SEAL ( 3 8 x 5 2 x 7 )
LEFT MAINSHAFT
BEARING (6203 SPL)
OIL SEAL (31 x 4 0 x 7 )
INSPECTION
Remove the crankshaft (page 16-17).
Turn the inner race of each crankcase bearing with
your finger. The bearing should turn smoothly and
quietly.
Also check that the bearing outer race fits tightly in
the crankcase.
Replace any bearing if the inner race does not turn
smoothly, quietly or if the outer race fits loosely in
the crankcase.
16-19