ENGINE REMOVAL/INSTALLATION
Disconnect the spark plug cap and engine coolant
temperature (ECT) sensor connector.
'04 - '05: Remove the hose clamp from the breather hoses.
Disconnect the crankcase breather hose from the 3-
way joint.
Loosen the hose band screw and disconnect the
lower radiator hose from the water pump cover.
After '05: Remove the hose clamps from the breather hoses.
Disconnect the crankcase breather hoses from the
3-way joint.
After '05: Loosen the hose band screw and disconnect the
lower radiator hose from the water pump cover.
ECT SENSOR CONNECTOR
LOWER RADIATOR HOSE
LOWER RADIATOR HOSE
10-6