Table of Contents
Advertisement
10/100
Orange
LNK/ACT
■ Per 100/1000Base-X SFP Interfaces
LED
Color
1000
Green
LNK/ACT
Orange
2.1.3 Switch Rear Panel
The rear panel of the Managed Switch indicates an AC inlet power socket, which accepts input power from 100 to 240V AC,
50-60Hz.
Figure 2-4
&
Figure 2-5
WGSW-24040 Rear Panel
WGSW-24040R Rear Panel
■ AC Power Receptacle
For compatibility with electric service in most areas of the world, the Managed Switch's power supply automatically adjusts
to line power in the range 100-240VAC and 50/60 Hz.
Plug the female end of the power cord firmly into the receptalbe on the rear panel of the Managed Switch. Plug the other
end of the power cord into an electric service outlet then the power will be ready.
The device is a power-required device, it means, it will not work till it is powered. If your networks should
active all the time, please consider using UPS (Uninterrupted Power Supply) for your device. It will
prevent you from network data loss or network downtime.
Power Notice:
In some area, installing a surge suppression device may also help to protect your Managed Switch from
being damaged by unregulated surge or current to the Switch or the power adapter.
Lights to indicate the port is running in 10/100Mbps speed and successfully established.
Blink: indicate that the switch is actively sending or receiving data over that port.
Lights to indicate that the port is operating at 1000Mbps.
Off to indicate the port is operating at 100Mbps or no link.
Lights to indicate the port is successfully established.
Blink: indicate that the switch is actively sending or receiving data over that port.
shows the rear panel of these Managed Switches
Figure 2-4 Rear panel of WGSW-24040
Figure 2-5 Rear panel of WGSW-24040R
User's Manual of WGSW-24040 / WGSW-24040R
Function
32
Advertisement
Table of Contents
