IP Address/Hostname
Timeout
Tx Successes
Tx Errors
Flow Samples
Counter Samples
Port Statistics
Object
Port
Rx and Tx Flow
Samples
Counter Samples
Buttons
Auto-refresh
:
Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.
: Click to refresh the page.
: Clears the sFlow receiver counters.
: Clears the per-port counters.
The IP address or hostname of the sFlow receiver.
The number of seconds remaining before sampling stops and the current sFlow
owner is released.
The number of UDP datagrams successfully sent to the sFlow receiver.
The number of UDP datagrams that has failed transmission.
The most common source of errors is invalid sFlow receiver IP/hostname
configuration. To diagnose, paste the receiver's IP address/hostname into the
Ping Web page (Diagnostics → Ping/Ping6).
The total number of flow samples sent to the sFlow receiver.
The total number of counter samples sent to the sFlow receiver.
Description
The port number for which the following statistics applies.
The number of flow samples sent to the sFlow receiver originating from this port.
Here, flow samples are divided into Rx and Tx flow samples, where Rx flow
samples contains the number of packets that were sampled upon reception
(ingress) on the port and Tx flow samples contains the number of packets that
were sampled upon transmission (egress) on the port.
The total number of counter samples sent to the sFlow receiver originating from
this port.
318
User's Manual of WGSW-24040 / WGSW-24040R