Table of Contents
Advertisement
2.1.3 Switch Rear Panel
The rear panel of the Managed Switch consists of the AC inlet power socket.
the Managed Switches.
GS-6320-8P2X Rear Panel
MGS-6320-8HP2X Rear Panel
MGS-6320-8T2X Rear Panel
■ AC Power Receptacle
For compatibility with electrical voltages in most areas of the world, the Managed Switch's power supply can automatically
adjust line power in the range of 100-240V AC and 50/60 Hz.
Plug the female end of the power cord firmly into the receptacle on the rear panel of the Managed Switch and the other end
of the power cord into an electrical outlet and the power will be ready.
The device is a power-required device, which means it will not work till it is powered. If your networks
should be active all the time, please consider using UPS (Uninterrupted Power Supply) for your device.
Power Notice:
It will prevent you from network data loss or network downtime. In some areas, installing a surge
suppression device may also help to protect your Managed Switch from being damaged by unregulated
surge or current to the Switch or the power adapter.
User's Manual of GS-6320 and MGS-6320 Managed Switches
Figure 2-1-3-1: Rear Panel of GS-6320-8P2X
Figure 2-1-3-2: Rear Panel of MGS-6320-8HP2X
Figre 2-1-3-3: Rear Panel of MGS-6320-8T2X
36
Figures 2-1-3-1 to 2-1-3-3
show the rear panels of
Advertisement
Table of Contents
