Sflow Status - Planet Networking & Communication WGSW-24040 User Manual

 Flow Sampler Max.
Header
 Counter Poller
Enabled
 Counter Poller Interval
Buttons
: See description under Owner.
: Click to refresh the page. Note that unsaved changes will be lost.
: Click to save changes. Note that sFlow configuration is not persisted to non-volatile memory.
: Click to undo any changes made locally and revert to previously saved values.

4.17.2 sFlow Status

This page shows receiver and per-port sFlow statistics, screen in
requested, the switch will automatically adjust it to the closest achievable. This
will be reported back in this field.
The maximum number of bytes that should be copied from a sampled packet to
the sFlow datagram. Valid range is 14 to 200 bytes with default being 128 bytes.
If the maximum datagram size does not take into account the maximum header
size, samples may be dropped.
Enables/disables counter polling on this port.
With counter polling enabled, this specifies the interval - in seconds - between
counter poller samples.
316
User's Manual of WGSW-24040 / WGSW-24040R
Figure 4-17-2 appears.