Qos Egress Port Tag Remarking - Planet Networking & Communication WGSW-24040 User Manual


Mode

4.9.6.1 QoS Egress Port Tag Remarking

The QoS Egress Port Tag Remarking for a specific port are configured on this page. The QoS Egress Port Tag Remarking
sscreen in Figure 4-9-8 appears.
The page includes the following fields:
Object
 Mode
 PCP/DEI Configuration
 DP level Configuration

(QoS class, DP level)
to (PCP, DEI) Mapping
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
Shows the tag remarking mode for this port.
Classified: Use classified PCP/DEI values.
Default: Use default PCP/DEI values.
Mapped: Use mapped versions of QoS class and DP level.
Figure 4-9-8 QoS Egress Port Tag Remarking page screenshot
Description
Controls the tag remarking mode for this port.
Classified: Use classified PCP/DEI values.
Default: Use default PCP/DEI values.
Mapped: Use mapped versions of QoS class and DP level.
Controls the default PCP and DEI values used when the mode is set to Default.
Controls the Drop Precedence level translation table when the mode is set to
Mapped.
The purpose of this table is to reduce the 2 bit classified DP level to a 1 bit DP
level used in the (QoS class, DP level) to (PCP, DEI) mapping process.
Controls the mapping of the classified (QoS class, DP level) to (PCP, DEI) values
when the mode is set to Mapped.
User's Manual of WGSW-24040 / WGSW-24040R
189