The page includes the following fields:
Object
Mode of IP Source
Guard Configuration
Port Mode
Configuration
Max Dynamic Clients
Figure 4-12-10 IP Source Guard Configuration screen page screenshot
Description
Enable the Global IP Source Guard or disable the Global IP Source Guard. All
configured ACEs will be lost when the mode is enabled.
Specify IP Source Guard is enabled on which ports. Only when both Global Mode
and Port Mode on a given port are enabled, IP Source Guard is enabled on this
given port.
Specify the maximum number of dynamic clients can be learned on given ports.
User's Manual of WGSW-24040 / WGSW-24040R
278