Security Network Nas Authenticate; Security Network Nas Statistics - Planet Networking & Communication WGSW-24040 User Manual

(default: Show current Maximum Reauth Count value
<allow_if_eapol_seen>: The value can only be set if you use the 'global' keyword in the beginning of the command.
disable:The Guest VLAN can only be entered if no EAPOL frames have been received on a port for the lifetime of the port
enable :The Guest VLAN can be entered even if an EAPOL frame has been received during the lifetime of the port
(default: Show current setting)
Default Setting:
disable
Example:
Enable NAS guest VLAN
WGSW-24040:/>security network nas guest_vlan enable

Security Network NAS Authenticate

Description:
Refresh (restart) 802.1X authentication process.
Syntax:
Security Network NAS Authenticate [<port_list>] [now]
Parameters:
<port_list>: Port list or 'all', default: All ports
: Force reauthentication immediately
now
(default: Schedule a reauthentication)
Example:
Start NAS authentication now for port 1.
WGSW-24040:/>security network nas authenticate 1 now

Security Network NAS Statistics

Description:
Show or clear 802.1X statistics.
Syntax:
Security Network NAS Statistics [<port_list>] [clear|eapol|radius]
User's Manual of WGSW-24040 / WGSW-24040R
427