Sflow Counterpoller - Planet Networking & Communication WGSW-24040 User Manual

Syntax:
sFlow FlowSampler [<port_list>] [<sampling_rate>] [<max_hdr_size>]
Parameters:
: Port list or 'all'. Default: All ports.
<port_list>
<sampling_rate>: Specifies the statistical sampling rate
The sample rate is specified as N to sample 1/Nth of the packets in the monitored flows. There are no
restrictions on the value, but the switch will adjust it to the closest possible sampling rate.
0 disables sampling.
<max_hdr_size> : Specifies the maximum number of bytes to transmit per flow sample.
Valid range is 14 - 200 bytes. Default: 128 bytes.

sFlow CounterPoller

Description:
Set or show counter polling interval configuration per port.
Syntax:
sFlow CounterPoller [<port_list>] [<interval>]
Parameters:
<port_list>: Port list or 'all'. Default: All ports.
<interval> : Polling interval in range 0 - 3600.
Set to 0 to release this port's resources.
sFlow Statistics Receiver
Description:
Get or clear receiver statistics.
Syntax:
sFlow Statistics Receiver [clear]
Parameters:
clear: Clear statistics.
User's Manual of WGSW-24040 / WGSW-24040R
540