Planet Networking & Communication WGSW-24040 User Manual page 115

Figure 4-6-3 appears.
The page includes the following fields:
Object

Delete

VLAN ID
 VLAN Name

Port Members

Adding a New VLAN
Buttons
: Click to add new VLAN.
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
Figure 4-6-3 VLAN Membership Configuration page screenshot
Description
To delete a VLAN entry, check this box.
The entry will be deleted on all stack switch units during the next Save.
Indicates the ID of this particular VLAN.
Indicates the name of the VLAN. Maximum length of the VLAN Name String is
32. VLAN Name can only contain alphabets or numbers. VLAN name should
contain atleast one alphabet. VLAN name can be edited for the existing VLAN
entries or it can be added to the new entries.
A row of check boxes for each port is displayed for each VLAN ID.
To include a port in a VLAN, check the box as
To include a port in a forbidden port list, check the box as shown
To remove or exclude the port from the VLAN, make sure the box is unchecked
as shown .
By default, no ports are members, and for every new VLAN entry all boxes are
unchecked.
Click "Add New VLAN" to add a new VLAN ID. An empty row is added to the
table, and the VLAN can be configured as needed. Legal values for a VLAN ID
are 1 through 4095.
The VLAN is enabled when you click on "Save". The "Delete" button can be used
to undo the addition of new VLANs.
User's Manual of WGSW-24040 / WGSW-24040R
115
.
.