Image Select - Planet Networking & Communication WGSW-24040 User Manual

24-port 10/100/1000mbps with 4 shared sfp wgsw-24040
Table of Contents

Advertisement

4.2.19 Image Select

This page provides information about the active and alternate (backup) firmware images in the device, and allows you to revert
to the alternate image. The web page displays two tables with information about the active and alternate firmware images. The
Image Select screen in
Figure 4-2-26
1.
2.
3.
The page includes the following fields:
Object
 Image
 Version
 Date
Buttons
appears.
In case the active firmware image is the alternate image, only the "Active Image" table is shown.
In this case, the Activate Alternate Image button is also disabled.
If the alternate image is active (due to a corruption of the primary image or by manual
intervention), uploading a new firmware image to the device will automatically use the primary
image slot and activate this.
The firmware version and date information may be empty for older firmware releases. This does
not constitute an error.
Figure 4-2-26 Software Image Selection page screenshot
Description
The flash index name of the firmware image. The name of primary (preferred)
image is image, the alternate image is named image.bk.
The version of the firmware image.
The date where the firmware was produced.
: Click to use the alternate image. This button may be disabled depending on system state.
User's Manual of WGSW-24040 / WGSW-24040R
74

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wgsw-24040r

Table of Contents