Planet Networking & Communication WGSW-24040 User Manual page 54

 User Name

Privilege Level
Buttons
: Click to add a new user.
Add / Edit User
This page configures a user – add, edit or delete user.
The page includes the following fields:
Object
 Username
 Password
 Privilege Level
The name identifying the user. This is also a link to Add/Edit User.
The privilege level of the user. The allowed range is 1 to 15. If the privilege level
value is 15, it can access all groups, i.e. that is granted the fully control of the
device. But others value need to refer to each group privilege level. User's
privilege should be same or greater than the group privilege level to have the
access of that group. By default setting, most groups privilege level 5 has the
read-only access and privilege level 10 has the read-write access. And the
system maintenance (software upload, factory defaults and etc.) need user
privilege level 15. Generally, the privilege level 15 can be used for an
administrator account, privilege level 10 for a standard user account and privilege
level 5 for a guest account.
Figure 4-2-5 Add / Edit User Configuration page screenshot
Description
A string identifying the user name that this entry should belong to. The allowed
string length is 1 to 32. The valid user name is a combination of letters, numbers
and underscores.
The password of the user. The allowed string length is 0 to 32.
The privilege level of the user. The allowed range is 1 to 15. If the privilege level
value is 15, it can access all groups, i.e. that is granted the fully control of the
device. But others value need to refer to each group privilege level. User's
User's Manual of WGSW-24040 / WGSW-24040R
54