Vlan Trunking Between Two 802.1Q Aware Switch - Planet Networking & Communication WGSW-24040 User Manual

4. Assign PVID for each port:
Port-1,Port-2 and Port-3 : PVID=2
Port-4,Port-5 and Port-6 : PVID=3
Port-7~Port-10 : PVID=1
5. Enable VLAN Tag for specific ports
Link Type: Port-3 (VLAN-2) and Port-6 (VLAN-3)
The Per Port VLAN configuration in

4.6.10.2 VLAN Trunking between two 802.1Q aware switch

The most cases are used for "Uplink" to other switches. VLANs are separated at different switches, but they need to access
with other switches within the same VLAN group. The screen in
Figure 4-6-10 appears.
Figure 4-6-10 Port 1-Port 6 VLAN Configuration
Figure 4-6-11
125
User's Manual of WGSW-24040 / WGSW-24040R
appears.