Mld Snooping Configuration - Planet Networking & Communication WGSW-24040 User Manual

The page includes the following fields:
Object
 VLAN ID
 Group
 Port

Mode
 Source Address
 Type
 Hardware Filter/Switch
Buttons
Auto-refresh : Check this box to enable an automatic refresh of the page at regular intervals.
: Click to refresh the page immediately.
: Updates the table, starting with the first entry in the IGMP Group Table.
: Updates the table, starting with the entry after the last entry currently displayed.

4.8.8 MLD Snooping Configuration

This page provides MLD Snooping related configuration. The MLD Snooping Configuration screen in
Figure 4-8-10 IGMP SSM Information page screenshot
Description
VLAN ID of the group.
Group address of the group displayed.
Switch port number.
Indicates the filtering mode maintained per (VLAN ID, port number, Group
Address) basis. It can be either Include or Exclude.
IP Address of the source. Currently, system limits the total number of IP source
addresses for filtering to be 128.
Indicates the Type. It can be either Allow or Deny.
Indicates whether data plane destined to the specific group address from the
source IPv4 address could be handled by chip or not.
User's Manual of WGSW-24040 / WGSW-24040R
166
Figure 4-8-11 appears.